thinger

- September 24, 2019

#include <ESP8266WiFi.h>
#include <DHT.h>
#define DHTPIN D1 //Pin data dari DHT terhubung ke pin D7 NodeMCU
#define DHTTYPE DHT11
DHT mufti(DHTPIN, DHTTYPE);

void setup() {
Serial.begin(9600);
Serial.println("Baca DHT11");
mufti.begin();
}

void loop() {
delay(1000); //1 detik
float h = mufti.readHumidity(); //Membaca kelembaban
float t = mufti.readTemperature(); //Membaca suhu dalam satuan Celcius
float f = mufti.readTemperature(true); //Membaca suhu dalam satuan Fahrenheit
Serial.print("Kelembaban: ");
Serial.print(h);
Serial.print("% RH ");
Serial.print("Suhu: ");
Serial.print(t);
Serial.print(" *C ");
Serial.print(f);
Serial.println(" *F");
}

bila sudah buka thinger.io

#include <ESP8266WiFi.h>
#include <DHT.h>
#include <ThingerESP8266.h>

#define USERNAME "muftiramdhani" //Username thinger.io
#define DEVICE_ID "MUFTI_NODEMCU_1"
#define DEVICE_CREDENTIAL "mmr123"

#define SSID "EVENT SEKOLAH IDN 5.2" //Hotspot yang kita pakai
#define SSID_PASSWORD "idnjonggol123"

#define DHTPIN D1 //Pin data dari DHT terhubung ke pin D7 NodeMCU
#define DHTTYPE DHT11

ThingerESP8266 thing(USERNAME, DEVICE_ID, DEVICE_CREDENTIAL);

DHT dht(DHTPIN, DHTTYPE);

float hum,temp;

void setup() {
Serial.begin(9600);
Serial.println("Baca DHT11");

dht.begin();

thing.add_wifi(SSID, SSID_PASSWORD);

thing["dht11"] >> [](pson& out){
out["humidity"] = hum;
out["celsius"] = temp;
};
}

void loop() {
thing.handle();

//sensor membutuhkan waktu 250 ms ketika membaca suhu dan kelembaban
float h = dht.readHumidity(); //Membaca kelembaban
float t = dht.readTemperature(); //Membaca suhu dalam satuan Celcius
float f = dht.readTemperature(true); //Membaca suhu dalam satuan Fahrenheit

hum = h;
temp = t;
}

jika sudah klik device yang telah kita buat tadi, dan tambahkan dashboard